Gazaur Mars 480 CF Combo Kit

Gazaur Mars 480 CF Combo Kit
LINGO 55/8-V1-4100kv power-system
floating type rotor control module

Frames Materials: Carbon Fiber CF
(Made from CNC machined carbon fiber sheet)

INCLUDES
- Mars 480 CF Kit (80% pre-assembled) set
- 340mm Wooden-Blades set (NACA type)
- LINGO 55 Helicopter ESC
- LINGO 8-V1-4100Kv Motor

Specifications:

• Body Length: 715-755mm	• Belt Drive Gear: 39T, 41T
• Body Height: 230mm	• Tail Transmitting Gear: 30T/15T
• Main Rotor Dia: 755-810mm	• Gear Ratio: 15: 1: 1.39 / 13.63: 1: 1.39
• Tail Rotor Dia: 150mm	• Unloaded Weight: 470g
• Motor Gear: 10T, 11T (shaft 3.17mm)	• Flying Weight: 780-920g
• Main Gear: 150T

Additional Electronics Required:

• 3S, 2200mah, 25C Li-po	• Head-lock Gyro
• 9-15gr. Cyclic Servos (3)	• 6+ CH Receiver
• 9-28gr. Rudder Servo	• PCM Transmitter

Gazaur 480 Setup Suggestions:

	Sport 3D	Extreme 3D
Motor	LINGO-8-4100Kv	LINGO-9-4400Kv
ESC	LINGO-55	LINGO-55
Battery	KP3S1P/2200/26C	KP3S1P/2200/36C
Pinion	10T-11T	10T
Main Blades	Gazaur 320-340mm	CF 335-350mm
Cyclic Servos (3)	HS-65MG/HS-5065MG	HS-65MG/HS-5065MG
Head-lock Gyro	RCE-550/GY-240	LTG-2100T/HG-5000
Rudder Servo	HS-65MG/HS-5065MG	LTS-3100G/HSG-5083MG
TX/RX	DX-7/AR7000	DX-7/AR7000

Guaranteed Quality - Made by Gazaur



Secret of Very Stable Flight Characteristics of Mars and Poseidon:

Thanks to the patented CCPM Servo Control Base from Gazaur, three CCPM controlling servos are mounted accordingly to a layout of horizontal plane and geometric symmetry. The result is giving the distinguished and very stable flight characteristics to Mars and Poseidon.



Revolutionary Rotor Head Design

The rotor head system is the soul of a helicopter; traditional helicopter with washout design not only adds additional weight, it also adds cross-coupling problems. To give our helicopter a new soul, we designed a single body floating type rotor head system; this system has fewer parts, less weight and a more linear movement which greatly improves flight stability. _________________________________________________________________________________





Tail Speedup Gear Design

Although this design is heavier and uses more parts, a simple test can prove its value. If you hold the main rotor and turn the tail rotor with force, our belt will not skip tooth.

Ultra Low Belt Speed

Tail drive belt only turns 1.9 times when main rotor turns once. This ultra low belt speed design equal extend belt lifetime. (Calculated with MXL38T main belt drive gear and MXL 20T tail gear. 38/20=1.9)